SELF-LOADING CONCRETE MIXER TRUCK (0.7 CBM)
Product Introduction
Model QET700 Self Loading Concrete Mixer Truck is a kind of unique vehicle which combines concrete mixer, transit mixer and wheel loader. The concrete output ability is 2.8 cube meters per hour. The wheel-side reducer driving axle and full hydraulic transmission case make the mixer truck move in any kinds of complex off road ways, the max. moving speed can be up to 25 km/hour, and the min. turning radius is 4.5 meters only.
QET700 is equipped with driving camera, automatic water feeding and metering system, electronic water suction pump, etc. The mixing drum is lifted up 16° by two hydraulic cylinders at bottom for high discharge over 1m in the front side of the vehicle.
* The vehicle size is small, which is suitable for limited site and widely used in new rural construction, urban construction, tunnel, airport, seaport, high-speed rail site, remote areas where there are no electric power, middle projects, farmer’s houses, building, country road, irrigation, reservoir, mine, rural bridges, high-way road etc, which characterized in saving labors, high efficiency concrete output.
* High strength steel plate, which enhances the load capacity and high stability of vehicle.
* The material of rolling ring and mixing drum adopts 16mn high strength steel which uses forging normalizing manufacturing process.
* Mixing blade is designed with varying pitching angles, which simplifies the feeding device, ensures the speed faster and mixing performance better.
Mixing Drum | |
Mixing volume | 0.7 M3 |
Geometrical volume | 0.9 M3 |
Concrete output | 0.7 M3 / batch, 2.8 M3 / hour |
Drum rotating speed | 13 rpm |
Engine | |
Brand | YUNNEI (Cummins Engine optional) |
Model | YN27GBZ |
Type | In-line, 4-Cylinder, Turbo Charged and Water Cooled, |
Rated power | 55 KW (75HP) @ 2400 rpm |
Max torque: | 230 N.M @2000 rpm |
Emission standard | Euro II. Euro 5 engine and EPA engine optional |
Chassis | |
Structure | Articulated chassis |
Transmission gear | Automatic, 4F+ 4R shift |
Driving & steering | 4-Wheel drive (4×4), hydraulic articulated steering |
Wheelbase | 2444 mm |
Tread | 1510 mm |
Axles | Small size wheel-side reducer driving axle |
Tyre size | Off road steel cord type, 20.5/70-16 |
Loading shovel & chute | |
Volumetric capacity | 300L |
Number of shovel loading times of full drum | Around 2 times |
Chute | 2 pcs. of discharging chute extensions. Manually rotating at 90 degree. |
Cabin | |
Type | ROPS & FOPS type closed front cab |
Joystick control | Double-joystick control the hydraulic system |
Weighing system | Optional. The “loading cells” are acting on the drum, and technical data are displayed on the shovel loader weigher inside the cabin. |
Air conditioning system | Optional |
Water system | |
Max. water suction capacity | 250 L/min. (Self-priming electronic water pump) |
Water tank capacity | 500 L. |
Electric system | |
Alternator | 28V-750W |
Battery: | 2x12V-80AH |
Vehicle | |
Max. Driving speed | 25.0km/h |
Gradient | Fully loaded 40% |
Min. turning radius | 4.5m |
Operating weight | 4,200 Kg |
Max. payload | 1,400 Kg |
Max. gross weight | 5,600 Kg |
Overall size (L×W×H) | 6903 x 1810 x 2684 mm (3063 mm full height) |
Service refill capacities | |
Fuel tank: | 63L |
Total hydraulic system capacity: | 63L |
Engine oil: | 16L |
Optional accessories:
- +90 degree slewing drum
- Dongfeng Cummins engine
- Foton Cummins engine
- Electronic Weighing device
- Centralized greasing system
- Hydraulic water pump
Note:
The above parameters are possible to change due to design improvement, so the parameters of your ordered machine may be different with the above information. Please accept it without advance notification for the parameters improvement.
Our advantages:
Our self-loading concrete mixer truck works through a brutal test of Chinese construction sites, and we have full confidence in our machines to be with best quality and high efficiency. We believe that our mixer truck could produce more and better concrete for you.
Our services:
Warranty: one year